FLUKE 5700A - $21,965.00 Laboratory Meter Calibration Standard The Fluke 5700A Calibrator is designed to cover the widest portion of today's calibration workload - a wide variety of DMMs from all manufacturers. It delivers direct voltage to 1100V and alternating voltage from 220 µV to 1100V at frequencies from 10Hz to 1.2MHz. Cardinal point resistances range from 1-ohm to 100 Mohms in x1 and x1.9 decades, including a short. Direct and alternating current are provided to 2.2 A, and frequencies for alternating current range from 10Hz to 10kHz.

CLARKE-HESS 5500-2 - $7,135.00 Primary Phase Calibration Standard The Clarke Hess 5500-2 is a crystal controlled Phase Angle Calibration Standard. The 5500-2 produces two digitally synthesized low distortion sine waves. The relative phase angle between these two sine waves may be varied in 0.001 degree steps over the range from -999.999 degrees to +999.999 degrees. The amplitudes of the two outputs may be individually adjusted from 50 mV to 120 V rms. 5500-2 function parameters may be entered either from the user friendly front panel controls or via the optically isolated IEEE-488.2 interface. A large bright display shows Phase, Frequency, and both output Amplitude values at all times. The 5500-2 combination of excellent phase and amplitude accuracy, and low output distortion from each channel make the 5500-2 an ideal source for calibrating Phase Meters, Vector Voltmeters, Broadband Watt Meters, Power Analyzers, and other Phase Sensitive Instruments

HP - AGILENT 89441A - $7,380.00 Digitial Modulation Signal Generator Calibration Standard -- Loaded With Options 1C2 / AY7 / AY8 / AY9 / AYA / UFG The Agilent 89441A covers baseband through RF frequencies of DC to 2.65 GHz in scalar and vector analysis modes. The scalar RF instrument mode allows full-frequency coverage in spans to 2648 MHz. Vector RF mode offers exceptional speed and additional signal processing for enhanced time-domain characterization and demodulation. Vector spans as wide as 7 MHz can be selected anywhere in the 2.65 GHz frequency range. A vector baseband mode is also available to provide all of the features and functionality of the Agilent 89410A. In vector RF mode, both phase and amplitude characteristics are captured in the time-series data. This information can be processed for narrow resolution spectrum analysis, AM/FM/PM demodulation, time selective analysis, vector modulation analysis (optional), and many other types of measurements.

BALLANTINE 1620A - $3,140.00 100 Amp Max AC/DC Laboratory Current Calibration Standard The Ballantine 1620A Transconductance Amplifier is a wide range DC or AC voltage to current converter. The 1620A converts a precision input voltage to a proportional precision output current. The 1620A is ideal for calibrating ammeters, current transformers, and shunts. Other applications include use as a high current power supply and as a power source in welding and bonding applications. The 1620A features 7 switch-selectable current ranges from 200 µA to 100 A. Output connections are via high current binding posts below 20A and Supercon connectors above 20A (mating connectors supplied). Output DC Current Accuracies of 0.02% + 0.02% of range are specified for the upper three current ranges. Calibration: add $234.00 Calibration with Full Test Data: add $312.00

GUILDLINE 9211A - $4,395.00 New-Old Stock (Never Used) Multi-Range Current Shunt, 300 Amp Max -- In Stock, Ships Same Day The Guildline 9211A Multi-Range Current Shunt is a self-contained 9 range, 4 terminal shunt for precision current measurement up to 300 amperes. Each 9211A shunt resistor provides a 100 mV drop at nominal rated current. A potentiometer or digital voltmeter is required as a readout for wide range precise current measurements.

HART SCIENTIFIC 9125 - $1,160.00 Laboratory Surface Probe Temperature Calibrator The Hart Scientific 9125 Surface Dry Well Calibrator is a small, portable instrument designed for quick on-site checks and calibrations of surface temperature probes. The 9125 calibrator was designed for portability, low cost, and ease of operation. The 9125 is settable in 0.1 degree increments from 33C to 200C.

OMEGA TRCIII-A - $1,065.00 Laboratory Ice Point (0 Degrees C) Temperature Calibrator The Omega TRCIII-A Ice Point Reference relies on the equilibrium of ice and distilled, deionized water at atmospheric pressure to maintain six reference wells at precisely 0°C. Each well extends into a sealed cylindrical chamber containing the distilled deionized water. The outer walls of the chamber are cooled by thermoelectric cooling elements. The alternate freezing and thawing of the ice accurately maintains a 0°C environment around the reference wells. The TRCIII-A has a built in temperature readout [°C/°F] with 0.1° resolution.