HP - AGILENT 6684A - $1,915.00 Option V50 Unit -- 50 Volts, 100 Amps Max Output -- Programmable DC Power Supply The Agilent 6684A model is part of the 6680 series of power supplies have been designed to provide performance needed for critical applications. These switching power supplies can be used in many noise sensitive applications where linear supplies were once the only solution. The low noise has been achieved while still preserving the efficiency and compactness of a switching supply. The 6680 series also provides a variety of protection features for both the load and the power supply. Features: * 0 to 40 V @ 128 A * Metered * 5000 W * Regulation: 0.001% * Auto-parallel up to three units * Outputs can be connected in series * Programmable over-voltage and over-current protection * Over-temperature protection * Discrete Fault Indicator/Remote Inhibit (DFI/RI) * Self-test occurs at power-on from an GPIB command * User definable power-on state * VXI plug & play drivers Calibration: add $117.00 Calibration with Full Test Data: add $156.00

ASSOCIATED RESEARCH 7564SA - $3,665.00 4 Test in 1 Instrument !! -- AC Hipot / DC Hipot / Insulation Resistance / Ground Bond The Associated Research 7564SA QUADCHECK II Electrical Safety Compliance Analyzer combines the three most common dielectric safety tests (AC Hipot, DC Hipot and a IR test) with a Ground Bond tester. The 7564SA features optional built-in or external scanner capabilities, a GPIB interface, a Single 2x20 LCD Display and easy to use set-up parameter adjustments. Optionally, an RS232 interface is available in place of the GPIB interface. Calibration: add $117.00 Calibration with Full Test Data: add $143.00

HP - AGILENT E3631A - $895.00 Our Most Popular Triple Output DC Power Supply The HP / Agilent E3631A DC Power supply is a dual range single output power supply of 6V/5A or 25V/1A with CV or CC operation with overvoltage and overcurrent protection. The model E3631A features a combination of programming capabilities via the front panel or remotely over the standard GPIB or RS-232 interfaces. Calibration: add $78.00 Calibration with Full Test Data: add $104.00

ASSOCIATED RESEARCH 5560DT - $1,630.00 Programmable AC / DC Hipot Tester The Associated Research 5560DT Hypot Tester is a Hypotplus II. It is a Dielectric Withstand and Ground Continuity Tester. The output rating is 6 kVDC @ 6 mA and 5 kVAC @ 20 mA. It has a Remote (PLC) - Inputs: Test, reset, program functions -Outputs: Pass, Fail, remote alarm, test in process - Memory: Allows storage of up to 10 different test programs Calibration: add $111.00 Calibration with Full Test Data: add $137.00

KEPCO BOP20-20M - $895.00 Bi-Polar Amplifier and DC Power Supply - 20 Volts at 20 Amps Max Output The Kepco BOP20-20M is a Bipolar DC power supply with a 20 VDC maximum and a 20 ADC maximum. Kepco BOP Series are high speed power operational amplifiers that can be used to provide dynamically agile voltage for test and simulation. They are not general purpose power supplies. Kepco BOP, while fully rated power supplies, are also high-powered operational amplifiers with full 4-quadrant, bipolar operation. Their output is capable of both sustained d-c and the replication of arbitrary a-c waveforms. Calibration: add $85.00 Calibration with Full Test Data: add $98.00

QUADTECH 1870 - $960.00 AC / DC Hipot Tester With IR Test Feature The Quadtech 1870 AC/DC Dielectric Analyzer is both an AC/DC hipot tester and an insulation resistance tester in one unit. For dielectric strength testing, the 1870 can be programmed for test voltage of 0V-6kV AC or DC and storage of the voltage and current at which breakdown occurs. Constant monitoring of leakage current and programmable current trip range (1uA to 10mA) provides essential data for detection of material breakdown. For insulation resistance testing the 1870 provides a measurement range of 500 kOhms to 2 TOhms at a basic accuracy of 3%. The IR test voltage is positive pole grounded and selectable as 45 V, 100 V, 250 V or 500 VDC with a basic accuracy of 1%. Programmable test time is 1s-999s and current is limited to 2mA. The 1870 is supplied standard with an IEEE-488 interface and PLC interface for remote control of instrument functions. Safety features include current limiting capability, a high voltage indicator and a safety interlock. Calibration: add $91.00 Calibration with Full Test Data: add $117.00

CALIFORNIA INSTRUMENTS 1201WP - $1,780.00 1200 VA Variable AC Power Source - Output Variable To Test International Line Voltages and Frequencies The Califorina Instruments 1201WP is a 1200VA AC Power Source for testing that requires variable line voltage and frequency. The 1201WP operates on single phase input voltage (115V standard, 230V optional). Features Output Frequency range: 47 Hz to 500 Hz Output Voltage Ranges: 5 V to130 V, or 5 V to 260 V (user selectable) Calibration: add $117.00 Calibration with Full Test Data: add $156.00

SORENSEN DLM8-75 - $635.00 Ultra-Compact 8 Volt / 75 Amp DC Power Supply The DLM 8-75 is a member of the Sorensen 600W series of programmable power supplies and is designed to provide continuously variable output voltage and current for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis. The front panel layout makes the DLM600W series easy to use. Voltage and current can be set from individual 10-turn potentiometer knobs. Control push buttons include power on, output on, local/remote, voltage/ current preview and overvoltage protection preview. Set-point or actual voltage/ current values can be viewed on two 3-½ digit LED displays. The DLM8-75 can also be controlled through IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option). DLM8-75 supplies can be connected in series or parallel. All models automatically accept any standard single phase input without manual set up. Calibration: add $85.00 Calibration with Full Test Data: add $111.00