| TekNet Electronics Test and Measurement Equipment Special Issue -- RF Test Clearance |
| TekNet Electronics is pleased to offer the following test and measurement equipment at reduced prices. The units are are fully tested and may be available to ship same day if required. Calibration is available on request. For more information on any of the equipment offered please contact us at toll free: 1(877)449-3760 (overseas 678-341-6000) or email sales@teknetelectronics.com |
| AMPLIFIER RESEARCH 50A220 - $4,868.00
|
 |
|
RF Power Amplifier - 50 Watts From 10 kHz to 220 MHz |
The Amplifier Research 50A220 is a 50 Watt Broadband RF Power Amplifier designed for use from 10 kHz to 220 MHz.
The 50A220 is a self-contained unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage.
The 50A220, when used with an RF sweep generator, will provide a minimum of 50 watts of swept power across the intended operating range.
Calibration: add $390.00
Calibration with Full Test Data: add $546.00
|
|
|
|
 |
ANRITSU MS2802A - $12,685.00
|
|
100 Hz to 32 GHz Spectrum Analyzer For Less Than $13k ! No External Mixers Required ! |
The Anritsu MS2802A Spectrum Analyzer operates over the frequency range from 100 Hz to 32 GHz.
The MS2802A contains a synthesized local oscillator and has many easy to use functions selectable from hard and soft keys, and parameter settings that are displayed on a CRT. Internal calibration routines for the IF section of the MS2802A control accuracy of reference level, LOG linearity and resolution bandwidth functions.
Anritsu MS2802A Features- Frequency Range 100 Hz to 32 GHz
- Input Impedance 50ohms
- Dynamic Range -110 dBm to +135 dBm
- Resolution Bandwidth 10 Hz - 3 MHz
- Video Bandwidth 1 Hz - 3 MHz
|
|
|
|
| ENI 525LA - $3,695.00
|
 |
40 Watts of RF Power From 1 MHz to 200 MHZ 25 Watts From 200 MHz to 500 MHz |
The ENI 525LA RF Power Amplifier provides 25 Watts of Class A power with flat frequency response over the range of 1 MHz to 500 MHz.
When used in applications from 1 MHz to 200 MHz, the 525LA will provide output power in excess of 40 Watts.
This versatility and outstanding performance makes the 525LA ideal for use in applications such as RF transmission, RFI/EMI susceptibility, NMR Spectroscopy and general laboratory applications.
Calibration: add $260.00
Calibration with Full Test Data: add $325.00
|
|
|
|
 |
HP - AGILENT 8340A - $9,385.00
|
|
10 MHz to 26.5 GHz RF Synthesized Sweeper With AM / FM / Pulse Modulation For Less Than $10k ! |
The 8340A Synthesized Sweeper provides 1 to 4 Hz frequency resolution over a 10 MHz to 26.5 GHz range at powers from -110 dBm to +10 dBm. A quartz oven time base, step attenuator, IEEE-488 interface, and AM/ FM/Pulse modulation are standard features. High stability, frequency accuracy, and signal purity make the 8340A a good choice for a stand-alone source or as a component of a vector or scalar network analyzer system.
Calibration: add $546.00
Calibration with Full Test Data: add $728.00
|
|
|
|
| HP - AGILENT 8447C - $395.00
|
 |
|
Clean Wideband RF Preamplifier 30 MHz to 300 MHz |
The HP Model 8447C Amplifier is a general purpose, wideband amplifier that provides 30 dB gain to signals from 30 to 300 MHz. It can be used to make up resistive probe losses or to improve sensitivity when used as a preamplifier fora spectrum analyzer or oscilloscope. It can also be used as a power amplifier for a signal generator
Calibration: add $260.00
Calibration with Full Test Data: add $325.00
|
|
|
|
 |
HP - AGILENT 8561B - $7,595.00
|
|
50 Hz to 6.5 GHz Synthesized Portable Spectrum Analyzer - Includes Option 003 Precision Frequency Reference |
The HP Agilent 8561B Spectrum Analyzer is a portable, high-performance, synthesized design operating from 50 Hz to 6.5 GHz. An efficient combination of often used keys and soft menu keys provide flexibility and an uncluttered front panel.
The 8561B features a built in AM/FM demodulator/speaker, a built-in frequency counter, and noise normalization modes for measuring direct carrier-to-noise.
The 8561B is an ideal choice for bench measurement and field maintenance of digital radios, CATV/Broadcast measurements, troubleshooting interference problems of devices and systems, and measuring low level signals in the presence of high level ambients.
Calibration: add $624.00
Calibration with Full Test Data: add $806.00
|
|
|
|
| HP - AGILENT 8672A - $3,450.00
|
 |
|
Synthesized 2 GHz to 18 GHz RF Signal Generator With Built-In 120 dB RF Attenuator and AM / FM Modulation |
The HP / Agilent 8672A is a synthesized microwave signal generator operating from 2 to 18.0 GHz. It has AM and FM modulation and can be externally leveled by detector or power meter.
Calibration: add $455.00
Calibration with Full Test Data: add $546.00
|
|
|
|
 |
TEKTRONIX 2756P - $9,835.00
|
|
10 KHz to 21 GHz Spectrum Analyzer -- Designed For Performance Up to 325 GHz With External Mixers |
The Tektronix 2756P RF Spectrum Analyzer is designed for use from 10 kHz to 21 GHZ (Up to 325 GHz with External Mixers). The 2756P offers GPIB (IEEE-488) programmability na da wide variety of features and benefits to meet your laboratories needs.
The 2756P utilizes and internal high-stability frequency reference to deliver accurate marker and center frequency reporting. The 2756P also offers 10Hz resolution for close-in spectral purity measurement requirements.
Calibration: add $546.00
Calibration with Full Test Data: add $728.00
|
|
|
|
 |
We accept Credit Card, Check, Money Order, Wire Transfer, or PayPal for domestic orders only. |
|
 |
Credit applications must be completed, signed and returned via fax before your order will be processed. |
|
 |
All items are subject to prior sale. |
|
 |
Prices are subject to change without notice. |
|
 |
TekNet Electronics assumes no responsibility for errors or omissions. |
|
| You are receiving this newsletter because you have purchased equipment or services from TekNet Electronics, or have signed up for our newsletter. If you do not wish to receive messages and special offers from TekNet Electronics, please click here to be removed from our distribution list or reply to this email with the word REMOVE in the subject line. |