HP - AGILENT 8753D - $14,995.00 Option 006 (6 GHz Frequency Range) and 1D5 (HIgh Stability Time Base) The HP Agilent 8753D builds on the performance of its predecessor the 8753C. The 8753D is a Vector Network Analyzer operating from 300 kHz to 3 GHz or 6 GHz if configured with option 006. The 8753D contains an integrated S-parameter test set. Option 011 deletes the S-parameter test set, allowing the use of existing 85046A/B or 85047A Test Sets. With it's color display, channels and measurements are easily distinguished from each other. The 8753D is ideally suited for component and network measurement. It has an integrated source covering the range from 300 kHz to 3 GHz and three input receiver channels; R, A, and B. Calibration: add $390.00 Calibration with Full Test Data: add $546.00

HP - AGILENT 3458A - $4,250.00 High Accuracy 8.5 Digit Multimeter The Agilent / HP 3458A multimeter’s high speed and extreme accuracy make it a perfect choice for all your measurement needs whether in the calibration lab or on the production floor. This unit is the most accurate and flexible multimeter offered by Agilent to date. The Agilent 3458A is an excellent investment due to its unprecedented flexibility, throughput, and low cost of ownership. This unit achieves levels of precision with up to 8.5 digits of measurement resolution and 0.1 parts per million transfer accuracy. The 3458A will be a great asset for your most demanding applications. Features and Benefits: * Math/statistics * 20 kB memory * Self-adjusting autocalibration * 100 mV to 1000 V ranges * 10 nV sensitivity * 0.05 ppm transfer accuracy * Analog, random and subsampled modes * 100 Ohm to 1 GOhm ranges * 2 and 4 wire ohms measurement with offset compensation

HP - AGILENT 83731A - $12,495.00 Includes Option 1E1 Output Step Attenuator, Additional Configurations Available The HP / Agilent 83731A is a 1 GHz to 20 GHz Synthesized Signal Generator. The 83731A is a non-sweeping signal generator providing FM, log AM, and high performance Pulse modulation capabilities. The 83731A can be used with 83550 series millimeter wave modules to generate signals to 110 GHz. All front panel functions are HP-IB programmable as well as SCPI compatible. 83731A features: Frequency range: 1.0 - 20.0GHz Output range: +10 to -90 dBm Frequency resolution: 1 kHz (1 Hz Resolution Optional) Calibration: add $494.00 Calibration with Full Test Data: add $624.00

HP - AGILENT 8114A - $4,995.00 High Powered Programmable Pulse Generator The 8114A 100V / 2A Pulse Generator is a high power, single output source that delivers fast, clean, positive or negative pulses at frequencies up to 15 MHz. The pulse generator protects the device under test through user-definable limits for voltage, current and duty cycle. Additionally, a TTL input allows the output to be enabled or disabled. An option is available that allows the baseline to be adjusted in the +/- 25 V range. Transitions are less than 12 ns for high impedance mode into 50-ohm loads, baseline 0 V. In 50 Ohm mode into 50-Ohm loads, the maximum voltage is 50 Vpp with transitions less than 7 ns. The variable baseline option requires the 50 Ohm/50 Ohm mode. The 8114A is ideal for driving devices such as laser and IR diodes, EEPROMS and flash memories which operate at high voltages or currents. The 8114A is programmable via an IEEE-488 interface. A memory card interface is provided for easy storage of waveform setups. Calibration: add $143.00 Calibration with Full Test Data: add $169.00

HP - AGILENT 8663A - $4,925.00 Ultra-High Spectral Purity - 100 kHz to 2.56 GHz Signal Generator Spectral purity is the key contribution of the HP / Agilent 8663A signal generator, making it ideal for many radar, satellite communication, and phase noise measurement applications. Typical absolute phase noise performance of this generator at a 1 kHz offset is as low as -135 dBc/Hz, depending on the band of operation. The frequency range of the 8663A is 100 kHz to 2560 MHz. The 8663A offers versatile AM, FM, Phase (option 002), and Pulse Modulation using either internal or externally applied modulating signals. A programmable 10 Hz to 99.9 kHz modulation synthesizer provides internal rate generation for all four modulation types and can be swept in either a log or linear fashion. The signal generator also has simultaneous modulation capability. Calibration: add $468.00 Calibration with Full Test Data: add $585.00

TEKTRONIX TDS7104 - $8,995.00 1 GHz Bandwidth, 10 GS/s Sample Rate, Color Display, 4 Channels The Tektronix TDS7104 is a 1 GHz, 4 Channel, 10 GS/s Digital Phosphor Oscilloscope. The TDS7104 is a high bandwidth, high resolution digitizing oscilloscope offering solutions for verification, debug, and characterization of complex electronic designs. Calibration: add $208.00 Calibration with Full Test Data: add $273.00

TEKTRONIX WFM601M - $3,450.00 Serial Component Measurement Set The Tektronix WFM601M Serial Component Measurement Set is a measurement quality serial component monitor with all features of the WFM601E. The WFM601M features additional digital analysis capabilities important to those involved in the design, installation and maintenance of 270 MB component digital systems.

KEITHLEY 2400 - $2,995.00 Low-Noise, High-Impedance Multimeter The 2400 Source Meter combines a precise, low-noise, highly stable DC power supply with a low-noise, highly repeatable, high-impedance multimeter. It has 0.012% basic accuracy with 5½-digit resolution. At 5½ digits, the SourceMeter delivers 520 readings/second over the IEEE-488 bus. At 4½ digits, it can read up to 2000 readings/second into its internal buffer. The unit has broad source and measurement ranges: • Source voltage from 5µV to 1100V; measure voltage from 1µV to 1100V. • Source current from 50pA to 1.05A; measure current from 10pA to 1.055A. • Measure resistance from 100µΩ (<100µΩ in manual ohms) to 211MΩ. • Maximum source power is 22W. Calibration: add $91.00 Calibration with Full Test Data: add $117.00

HP - AGILENT 8991A - $3,995.00 Peak Power Analyzer The HP / Agilent 8991A Peak Power Analyzer provides complete and accurate characterization of today's complex pulsed signals. The 8991A is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8991A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes. Calibration: add $286.00 Calibration with Full Test Data: add $338.00

TEKTRONIX 2712 - $2,595.00 9 kHz to 1.8 GHz Spectrum Analyzer The Tektronix 2712 Spectrum Analyzer operates from 9 kHz to 1.8 GHz. The 2712 is a lightweight, full-featured unit designed to be at home or on-site. The 2712 features high sensitivity with a built-in preamplifier, 5x10E-7 frequency accuracy, AM/FM demodulator, and powerful built-in measurement routines. Available options permit EMC measurements with a quasi-peak detector, video monitor, tracking generator, preselector and more. Calibration: add $364.00 Calibration with Full Test Data: add $468.00

VOLTECH PM3000 - $2,750.00 Full 3 Channel Universal Power Analyzer The Voltech PM3000 is a single or 3 Channel Universal Power Analyzer. Calibration: add $195.00 Calibration with Full Test Data: add $234.00

TEKTRONIX TDS754C - $4,650.00 500 MHZ, 4 Channel, Color Display, Digitizing Oscilloscope The TDS754C Digitizing Oscilloscope is a 4 channel sampling scope with a bandwidth of 500MHz. The sampling rate is 2 GS/s. The maximum record length is 50,000 pts. Calibration: add $208.00 Calibration with Full Test Data: add $273.00

HP - AGILENT 8566B - $5,650.00 Operates from 100 Hz to 22 GHz The HP / Agilent 8566B is a high-performance spectrum analyzer for bench and ATE system use. The 8566B operates from 100 Hz to 22 GHz and up to 325 GHz with external mixers. The exceptional frequency stability of the Agilent 8566B make measurements with a 10 Hz resolution bandwidth easy. This narrow resolution bandwidth yields sensitivities to -135 dBm. Excellent frequency stability, sensitivity, and frequency-reference accuracy combine to allow very accurate measurement of small signals in the presence of large ones. Typical applications include EMC testing, broadband signal surveillance, and component stimulus-response testing. Calibration: add $845.00 Calibration with Full Test Data: add $1,040.00

MARCONI 2024 - $1,995.00 Includes Option 4 High Stability Time Base & Option 11 Fast Pulse With High Power The Marconi 2024 is a portable and lightweight Synthesized Signal Generator with a frequency range of 9 kHz to 2.4 GHz with a resolution of 1 Hz across the band and a RF output up to +13 dBm with a resolution of 0.1dB. The RF output of the 2024 can be amplitude, frequency, phase or pulse modulated. Calibration: add $416.00 Calibration with Full Test Data: add $598.00

HP - AGILENT 8665B - $14,495.00 Includes Option 001 High Stability Timebase & Option 004 Low Noise The HP / Agilent 8665B is a high performance signal generator suited for basic receiver testing up to 6 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 20 MHz are suitable for many applications such as high-speed digital communications. The internal modulation source generates sine, square, triangle or sawtooth waveforms. For applications demanding the lowest RF leakage, Option 010 provides increased RF shielding. Calibration: add $468.00 Calibration with Full Test Data: add $585.00

HP - AGILENT 53131A - $895.00 Includes Option 001 -- Upgrade to Medium Stability Timebase The HP / Agilent 53131A Universal Frequency Counter is a compact, high performance unit designed for benchtop and system automation. The 53131A has frequency resolution of 10 digits per second, 500 ps time interval resolution and a complete set of test and analysis features. The 53131A configuration options include two 225 MHz channels, an optional third channel to 3 GHz, 5 GHz, or 12.4 GHz, and one of three available time bases. Standard measurements include: frequency, frequency ratio, time interval, rise/fall time, phase, duty cycle, positive/negative pulse width, totalize, peak voltage, time interval average and time interval delay. Calibration: add $117.00 Calibration with Full Test Data: add $143.00