HP - AGILENT 8564E - $19,995.00 007 DIGITIZED FAST TIME DOMAIN SWEEPS The HP / Agilent 8564E 9 kHz to 40 GHz Portable Millimeter Wave Spectrum Analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 40 GHz (preselected above 2.75 GHz) with a single coaxial connection. The 8564E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage. Calibration: add $754.00 Calibration with Full Test Data: add $988.00

ROHDE - SCHWARZ SMIQ06B - $8,450.00 The Rohde - Schwarz SMIQ06B Signal Generator offers a variety of modulation options for today's testing needs from 300 kHz to 6.4 GHz. Using Digital Signal Processor (DSP) technology, the SMIQ06B produces high accuracy broadband digital modulation signals supporting a variety of digital radio protocols. The SMIQ06B features a broadband I/Q modulator with excellent vector accuracy. Analog modulation is also provided making the SMIQ06B an excellent choice to support current and future testing needs.

HP - AGILENT 8663A - $5,595.00 Spectral purity is the key contribution of the HP / Agilent 8663A signal generator, making it ideal for many radar, satellite communication, and phase noise measurement applications. Typical absolute phase noise performance of this generator at a 1 kHz offset is as low as -135 dBc/Hz, depending on the band of operation. The frequency range of the 8663A is 100 kHz to 2560 MHz. The 8663A offers versatile AM, FM, Phase (option 002), and Pulse Modulation using either internal or externally applied modulating signals. A programmable 10 Hz to 99.9 kHz modulation synthesizer provides internal rate generation for all four modulation types and can be swept in either a log or linear fashion. The signal generator also has simultaneous modulation capability. Calibration: add $468.00 Calibration with Full Test Data: add $585.00

HP - AGILENT 4284A - $6,995.00 201 General Purpose Handler Interface ; 301 Scanner Interface The HP / Agilent 4284A Precision LCR Meter is a cost-effective solution for component and material measurement. The 4284A may be used to improve component quality by providing an accurate, high-throughput test solution. The wide 20 Hz to 1 MHz test frequency range and superior test-signal performance allow the 4284A to test components to most commonly referenced test standards, such as IEC/MIL standards, and under conditions that simulate the intended application. Whether in research and development, production, quality assurance, or incoming inspection, the 4284A will meet all of your LCR meter test and measurement requirements.

HP - AGILENT 3458A - $5,695.00 Includes Option 002 HIGH STABILITY (4 PPM/YEAR) REFERENCE The Agilent / HP 3458A multimeter’s high speed and extreme accuracy make it a perfect choice for all your measurement needs whether in the calibration lab or on the production floor. This unit is the most accurate and flexible multimeter offered by Agilent to date. The Agilent 3458A is an excellent investment due to its unprecedented flexibility, throughput, and low cost of ownership. This unit achieves levels of precision with up to 8.5 digits of measurement resolution and 0.1 parts per million transfer accuracy. The 3458A will be a great asset for your most demanding applications. Features and Benefits: * Math/statistics * 20 kB memory * Self-adjusting autocalibration * 100 mV to 1000 V ranges * 10 nV sensitivity * 0.05 ppm transfer accuracy * Analog, random and subsampled modes * 100 Ohm to 1 GOhm ranges * 2 and 4 wire ohms measurement with offset compensation

HP - AGILENT 4396A - $9,975.00 1D5 High Stability Frequency Reference ; 1D6 Time Gated Spectrum Analysis The HP 4396A provides excellent RF vector network, spectrum, and optional impedance measurements for lab and production applications. Gain, phase, group delay, distortion, spurious, CN, and noise measurements often required for evaluating componenets and circuits can be measured using one instrument. When combined with a test set, the HP 4396A provides reflection measurements, such as return loss, and SWR, and S parameters. As a vector network analyzer, the HP 4396A operates from 100 kHz to 1.8 GHz with 1 mHz resolution and its intergrated synthesized source provides -60 to +20 dBm of output power with 0.1 dB resolution. The dynamic magnitude and phase accuracy are +-0.05 dB and +-0.3 deg so that it can accurately measure gain and group delay flatness, which are becoming more important in modern electronic systems. Calibration: add $728.00 Calibration with Full Test Data: add $936.00

HP - AGILENT 8114A - $5,295.00 The 8114A 100V / 2A Pulse Generator is a high power, single output source that delivers fast, clean, positive or negative pulses at frequencies up to 15 MHz. The pulse generator protects the device under test through user-definable limits for voltage, current and duty cycle. Additionally, a TTL input allows the output to be enabled or disabled. An option is available that allows the baseline to be adjusted in the +/- 25 V range. Transitions are less than 12 ns for high impedance mode into 50-ohm loads, baseline 0 V. In 50 Ohm mode into 50-Ohm loads, the maximum voltage is 50 Vpp with transitions less than 7 ns. The variable baseline option requires the 50 Ohm/50 Ohm mode. The 8114A is ideal for driving devices such as laser and IR diodes, EEPROMS and flash memories which operate at high voltages or currents. The 8114A is programmable via an IEEE-488 interface. A memory card interface is provided for easy storage of waveform setups. Calibration: add $143.00 Calibration with Full Test Data: add $169.00

HP - AGILENT 8566B - $5,850.00 Ask us about Color LCD Upgrade! The HP / Agilent 8566B is a high-performance spectrum analyzer for bench and ATE system use. The 8566B operates from 100 Hz to 22 GHz and up to 325 GHz with external mixers. The exceptional frequency stability of the Agilent 8566B make measurements with a 10 Hz resolution bandwidth easy. This narrow resolution bandwidth yields sensitivities to -135 dBm. Excellent frequency stability, sensitivity, and frequency-reference accuracy combine to allow very accurate measurement of small signals in the presence of large ones. Typical applications include EMC testing, broadband signal surveillance, and component stimulus-response testing. Calibration: add $845.00 Calibration with Full Test Data: add $1,040.00

HP - AGILENT 8991A - $4,295.00 The HP / Agilent 8991A Peak Power Analyzer provides complete and accurate characterization of today's complex pulsed signals. The 8991A is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8991A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes. Calibration: add $286.00 Calibration with Full Test Data: add $338.00

HP - AGILENT 8665B - $14,995.00 Options 001, 004, 008 The HP / Agilent 8665B is a high performance signal generator suited for basic receiver testing up to 6 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 20 MHz are suitable for many applications such as high-speed digital communications. The internal modulation source generates sine, square, triangle or sawtooth waveforms. For applications demanding the lowest RF leakage, Option 010 provides increased RF shielding. Calibration: add $468.00 Calibration with Full Test Data: add $585.00

VOLTECH PM3000 - $2,995.00 This is a 3 Channel Unit The Voltech PM3000 is a single or 3 Channel Universal Power Analyzer. Calibration: add $195.00 Calibration with Full Test Data: add $234.00

HP - AGILENT 3708A - $2,750.00 75 Ohm Unit The Agilent / HP 3708A Noise & Interference Test Set provides an accurate method of assessing performance of microwave radio and satellite modem systems by providing the carrier to noise (C/N) and carrier to interface (C/I) necessary to make C/N and C/I versus bit error ratio (BER) measurements. Accurate and repeatable C/N and C/I ratios can be maintained even in the presence of severe signal variations. This unit can also be used to assess the performance of digital TV forward error correction (FEC) by assessing the tolerance of quasi-error free systems to injected noise and interference. Calibration: add $468.00 Calibration with Full Test Data: add $585.00