HP - AGILENT 8665B - $19,950.00 100 kHz to 6 GHz Ultra Low Noise Synthesized Signal Generator - Options 001/004/008 - High Stability Timebase/Low Noise/Pulse Modulation ! The HP / Agilent 8665B is a high performance signal generator suited for basic receiver testing up to 6 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 20 MHz are suitable for many applications such as high-speed digital communications. The internal modulation source generates sine, square, triangle or sawtooth waveforms. For applications demanding the lowest RF leakage, Option 010 provides increased RF shielding. Calibration: add $468.00 Calibration with Full Test Data: add $585.00

HP - AGILENT 33120A - $1,095.00 Super Reliable Portable 15 MHz Function Generator ! The HP / Agilent 33120A is a high-performance, full-function 15 MHz synthesized function generator. The 33120A features sine, triangle, square, ramp, and noise waveforms, a 12-bit, 40 MSa/s, 16k-deep arbitrary waveform generator, and both internal sweep and modulation capabilities. The 33120A is ideal for both bench and system applications. Both GPIB and RS-232 interfaces are standard. Calibration: add $117.00 Calibration with Full Test Data: add $143.00

HP - AGILENT 8663A - $7,495.00 Ultra Low Noise 100 kHz to 2.56 GHz Synthesized Signal Generator ! Spectral purity is the key contribution of the HP / Agilent 8663A signal generator, making it ideal for many radar, satellite communication, and phase noise measurement applications. Typical absolute phase noise performance of this generator at a 1 kHz offset is as low as -135 dBc/Hz, depending on the band of operation. The frequency range of the 8663A is 100 kHz to 2560 MHz. The 8663A offers versatile AM, FM, Phase (option 002), and Pulse Modulation using either internal or externally applied modulating signals. A programmable 10 Hz to 99.9 kHz modulation synthesizer provides internal rate generation for all four modulation types and can be swept in either a log or linear fashion. The signal generator also has simultaneous modulation capability. Calibration: add $468.00 Calibration with Full Test Data: add $585.00

STANFORD RESEARCH DS335 - $795.00 Stanford Research Quality That Won't Bust Your Budget - Includes Option 01 GPIB & RS-232 Interfaces ! The Stanford Research DS335 is a compact , 3.1 MHz Synthesized Function Generator. Standard outputs include sine, square waves up to 3.1 MHz, and ramps and triangles ( up to 10 kHz). Output amplitude in to 50 ohms is 50 mVpp to 10 Vpp. Calibration: add $156.00 Calibration with Full Test Data: add $195.00

HP - AGILENT 8657B - $1,995.00 100 khz to 2.06 GHz AM/FM Synthesized Signal Generator Under $2K ! Option 001 High Stability Timebase Available - Add $250 ! The HP / Agilent 8657B offers excellent performance at an economical price. The low residual FM and excellent phase noise performance of the 8657B signal generator makes them ideal for many in-channel and even out-of-channel receiver tests. The 8657B is a versatile signal generator offering a variety of features, such as extended frequency coverage up to 2060 MHz, pulse modulation, simultaneous and mixed modulation combinations of AM and FM, as well as a carrier phase adjust capability that allows you to characterize phase-sensitive devices. In addition, the 8657B offers a wide output range, +13 to -143.5 dBm with superior level accuracy of ±1.0 dB. Built to stringent quality standards, the 8657B will promote consistent, repeatable measurements every time. Calibration: add $364.00 Calibration with Full Test Data: add $468.00

HP - AGILENT 8672A - $2,495.00 Great Price For a 2 to 18 GHz Synthesized Signal Generator ! The HP / Agilent 8672A is a synthesized microwave signal generator operating from 2 to 18.0 GHz. It has AM and FM modulation and can be externally leveled by detector or power meter. Calibration: add $455.00 Calibration with Full Test Data: add $546.00

ROHDE - SCHWARZ SMIQ06ATE - $5,950.00 300 kHz to 6.4 GHz SMIQ06 Performance Under $6K ! The Rohde-Schwarz SMIQ06ATE Signal Generator is a version of the SMIQ06B designed for ATE environments. The SMIQ06ATE Signal Generator offers a variety of modulation options for today's testing needs from 300 kHz to 6.4 GHz. Using Digital Signal Processor (DSP) technology, the SMIQ06ATE produces high accuracy broadband digital modulation signals supporting a variety of digital radio protocols. The SMIQ06ATE features a broadband I/Q modulator with excellent vector accuracy. Analog modulation is also provided making the SMIQ06ATE an excellent choice to support current and future testing needs. The SMIQ06ATE is fully programmable via IEEE, and has no manual front panel display.

HP - AGILENT 83592C - $2,850.00 10 MHz to 20 GHz RF Sweep Generator Plug-In - With option 002 - Step Attenuator ! The 83592C RF plug-in provides a 10 MHz to 20 GHz broadband coaxial swept frequency source for the 8350A or 8350B sweep oscillator mainframe. Applications include scalar network analysis, serving as a local oscillator for down-converting high frequency signals, and a stand-alone RF signal source. Calibration: add $390.00 Calibration with Full Test Data: add $585.00