| TekNet Electronics Test and Measurement Equipment Special Issue - AC Power Source Sale |
| TekNet Electronics is pleased to offer the following test and measurement equipment at reduced prices. The units are are fully tested and can ship same day if required. Calibration is available on request. For more information on any of the equipment offered please contact us at toll free: 1(877)449-3760 (overseas 678-341-6000) or email sales@teknetelectronics.com |
| CALIFORNIA INSTRUMENTS 3001IX - $6,950.00
|
 |
|
3000 VA AC & DC Power Source / Digital Scope / Power Analyzer In 1 Device ! Programmable Transient, Harmonic, & Arbitrary Waveform Generation & Analysis ! |
The California Instruments model 3001iX is an AC power source that features:
Single Box AC Power System
Combines AC & DC power source, digital
scope and power analyzer in one
instrument
DC Output Capability
Use same instrument for DC output
3000 VA to 15000 VA AC Power Levels
Match power source and cost to
application requirements
Arbitrary Waveform Generator
Test products for harmonics
susceptibility
Built-in DSP based Power Analyzer
Performs voltage and load current
analysis on all phases
Programmable Output Impedance
Simulate real-world line conditions
High Crest Factor Capability
Drives a wide variety of
non-linear loads
CE Marked
Safe, reliable and consistent operation
Calibration: add $546.00
Calibration with Full Test Data: add $728.00
|
|
|
|
 |
CALIFORNIA INSTRUMENTS 5001IX - $8,950.00
|
|
5000 VA AC & DC Power Source / Digital Scope / Power Analyzer In 1 Device ! Programmable Transient, Harmonic, & Arbitrary Waveform Generation & Analysis ! |
The California Instruments model 5001iX is an AC power source that features:
Single Box AC Power System
Combines AC & DC power source, digital
scope and power analyzer in one
instrument
DC Output Capability
Use same instrument for DC output
3000 VA to 15000 VA AC Power Levels
Match power source and cost to
application requirements
Arbitrary Waveform Generator
Test products for harmonics
susceptibility
Built-in DSP based Power Analyzer
Performs voltage and load current
analysis on all phases
Programmable Output Impedance
Simulate real-world line conditions
High Crest Factor Capability
Drives a wide variety of
non-linear loads
CE Marked
Safe, reliable and consistent operation
|
|
|
|
| CALIFORNIA INSTRUMENTS 801P - $2,495.00
|
 |
|
Programmable 16 to 500 Hz Controller - Great For Electrical Product Complaince or Aviation Testing Applications ! |
The California Instruments 801P is an ideal source for general purpose AC power applications that require variable voltage and frequency at power levels up to 800 VA. With simple knobs used to set voltage, frequency and current limit, the 801P provides an inexpensive source of AC power in a small, portable and lightweight package.
The 801P uses a precision digital sinewave generator to produce a low distortion output. Dual LCD readouts clearly display programmed settings for voltage, current limit and frequency. Load current is measured using true RMS sensing and can be displayed on the front panel as well.
Exclusive Features:
▪ Low Cost
▪ Portable
▪ Programmable
▪ Dual voltage ranges
▪ 16 Hz to 500 Hz
▪ Simple Front Panel Connection
▪ UL and CSA Safety Tested
Calibration: add $91.00
Calibration with Full Test Data: add $117.00
|
|
|
|
 |
PACIFIC POWER SOURCE 120ASX - $2,495.00
|
|
2000 VA of Single Phase AC Power - 15 to 1200 Hz Programmable Controller For Arbitrary Waveforms ! |
The Pacific Power Source ASX120 is a 2000 VA High Performance Switching AC Power Source.
Calibration: add $156.00
Calibration with Full Test Data: add $195.00
|
|
|
|
| BEHLMAN P1351 - $795.00
|
 |
|
Super Small Package for 1350 VA of Clean AC Power ! |
The Behlman P1351 AC Power Supply / Frequency Converter / Inverter delivers 1350 VA of clean, regulated AC power in a 3.5 inch high bench top unit, that easily converts to rack mount, for far less cost than competitive models.
The P1351 can simulate any world wide utility as well as aircraft and shipboard power. Simply select the required frequency from 45 to 500 Hz, choose a voltage range either 0-135 VAC or 0-270 VAC, dial up your desired voltage, and you are ready to test. Options include Remote Control, using either IEEE-488, RS232 or 0-10 VDC and Extended Frequency range.
The P1351 delivers all the quality features you have come to expect from Behlman; clean sinewave output with excellent line and load regulation, high efficiency and low harmonic distortion, in the industry's most compact size.
Calibration: add $117.00
Calibration with Full Test Data: add $143.00
|
|
|
|
 |
CALIFORNIA INSTRUMENTS FCS18M - $8,950.00
|
|
Single or Three Phase Manual Controller Delivers 18 KVA Variable AC Power - Up to 133 Amps Single Phase, 44 Amps Three Phase at 135 Volts! |
The California Instruments FCS18M is an 18 KVA, Single or Three Phase AC power source. The FCS18M features a manual controller offering local set-up of voltqage, frequency, and current limit. The manual controller also features analog program control of the output voltage. The FCS Series operates from 3-Phase input power.
FCS18M Specifications
- AC Output Power: 18000 VA
- Frequency Range: 45 Hz - 1200 Hz
- Single or Three Phase Output
- Voltage Range: 0 VAC - 135 VAC/Phase
|
|
|
|
| CALIFORNIA INSTRUMENTS FCS36 - $16,495.00
|
 |
|
Single or Three Phase Fully Programmable Controller Delivers 36 KVA Variable AC Power - Up to 266 Amps Single Phase, 88 Amps Three Phase at 135 Volts! Dual Range 156/312 VAC Output at 45 to 550 Hz ! Extensive Programming & Readback Features ! |
The California Instruments FCS36 is an 36 KVA, Single or Three Phase AC power source. The FCS36 features either a fully programmable, or manual controller offering local set-up of voltqage, frequency, and current limit. The manual controller also features analog program control of the output voltage. The FCS Series operates from 3-Phase input power.
FCS36 Features- AC Output Power: 36000 VA
- Frequency Range: 45 Hz - 1200 Hz
- Single or Three Phase Output
- Voltage Range: 0 VAC - 135 VAC/Phase (Standard Configuration)
|
|
|
|
 |
VOLTECH PM3000 - $4,495.00
|
|
Single or Three Phase High Performance Power Analyzer ! |
Universal Power Analyzer
Calibration: add $130.00
Calibration with Full Test Data: add $175.50
|
|
|
|
 |
We accept Credit Card, Check, Money Order, Wire Transfer, or PayPal for domestic orders only. |
|
 |
Credit applications must be completed, signed and returned via fax before your order will be processed. |
|
 |
All items are subject to prior sale. |
|
 |
Prices are subject to change without notice. |
|
 |
TekNet Electronics assumes no responsibility for errors or omissions. |
|
| You are receiving this newsletter because you have purchased equipment or services from TekNet Electronics, or have signed up for our newsletter. If you do not wish to receive messages and special offers from TekNet Electronics, please click here to be removed from our distribution list or email your request to remove@teknetelectronics.com. |