| TekNet Electronics Test and Measurement Equipment Special Issue 18 May 2007 |
| TekNet Electronics is pleased to offer the following test and measurement equipment at reduced prices. The units are are fully tested and can ship same day if required. Calibration is available on request. For more information on any of the equipment offered please contact us at toll free: 1(877)449-3760 (overseas 678-341-6000) or email sales@teknetelectronics.com |
| HP - AGILENT 83731A - $14,995.00
|
 |
|
Excellent Signal Purity Combined with Sophisticated Modulation Performance -- Includes Option 1E1, 90 dB Step Attenuator |
The HP / Agilent 83731A, 1 GHz to 20 GHz Synthesized Signal Generator is the recommended local oscillator for the 8970B noise figure meter. The 83731A characteristic low broadband noise reduces errors in measurements of low gain devices. The HP 83731A can be used with 83550 series millimeter wave modules to generate signals to 110 GHz. All front panel functions are HP-IB programmable as well as SCPI compatible.
83731A Specifications:-
Frequency range: 1.0 - 20.0GHz
- Output range: +10 to -90 dBm
- Frequency resolution: 1 kHz
Calibration: add $494.00
Calibration with Full Test Data: add $624.00
|
|
|
|
 |
STANFORD RESEARCH DS360 - $1,495.00
|
|
Ultra-Clean Audio Source -- Less Than 0.001% The Best of The Best of The Best! |
The Stanford Research DS360 offers the performance of a low distortion analog source and the precision of direct digital synthesis (DDS). With less than 0.001 % total harmonic distortion (THD), 25 ppm frequency accuracy, and a broad range of features including sweeps and bursts, the DS360 is the ideal source for audio frequency applications. Sine square, two-tone, burst, white noise, and pink noise outputs are available. Operating frequencies are from 1 mHz - 200 kHz. The DS360 features balanced and unbalanced outputs. The unbalanced output has offset capability.
|
|
|
|
| HP - AGILENT E3632A - $780.00
|
 |
|
Current OEM Catalog Product - $300.00 Below List! |
The HP / Agilent E3632A DC Power supply is a dual range single output power supply of 15V/7A or 30V/4A with CV or CC operation with overvoltage and overcurrent protection. The model E3632A features a combination of programming capabilities via the front panel or remotely over the standard GPIB or RS-232 interfaces.
Calibration: add $58.50
Calibration with Full Test Data: add $84.50
|
|
|
|
 |
VOLTECH PM3000A - $5,250.00
|
|
Programmable Precision Three Phase Power Analysis With All The Bells And Whistles! |
The Voltech PM3000A Precision Power Analyzer is available in single and three phase models.
PM3000A Features:- Intuitive front panel or Windows software operation
- High 0.05% basic accuracy
- Wide bandwidth measurements, DC and 0.1 Hz to 1 MHz
- Measures W, V, A, VA, VAR, Power Factor, Cos, Vpk, Apk, Crest Factors, Frequency and Inrush Current
- Harmonics of V, A, (incl. Phase) and W to the 99th
- Total Harmonic Distortion(THD)
- Integrator for W-hr, VA-hr, A-hr, VA-hr, Average and Target PF
- Crest factors up to 20
- Accurate on distorted waveforms and at low power factors
Calibration: add $130.00
Calibration with Full Test Data: add $195.00
|
|
|
|
| IFR - AEROFLEX 6960B - $995.00
|
 |
|
Includes Model 6910 Power Sensor (10 MHz to 20 GHz, -30 to +20 dBm) and Sensor Cable in Package Price! |
The IFR / Aeroflex 6960B RF Power Meter is a high accuracy
instrument which together with its associated
power sensors provides measurements at frequencies
from 30 kHz up to 46 GHz over a wide range of
power levels. Its numeric keyboard enables easy
manual control while full GPIB implementation
with SRQ mask and trigger modes make it the logical
choice for fast ATE systems.
6960B FeaturesExtensive frequency coverage: 30 kHz to 46 GHzWide dynamic range: -70 dBm (100 pW) to +44dBm (25W)Fast response on GPIB of 25 msAuto averaging with manual overrideBoth 50 ohm and 75 ohm sensorsLow sensor VSWR reduces measurement uncertaintySensor linearity correction for improved accuracyMaximum hold facilityOptional DC operation
|
|
|
|
 |
IFR - AEROFLEX 1500 - $3,695.00
|
|
1 GHz Communications Service Monitor -- Includes Spectrum Analyzer & Tracking Generator! |
The IFR Aeroflex FM/AM 1500 is a microprocessor controlled, digitally synthesized communication service monitor, which integrates the functions of several different test instruments into a single, compact and portable unit. The FM/AM 1500 is used in a wide range of communication test functions associated with most types of simplex and duplex transceiving equipment, including mobile telephone systems, AM/FM/SSB transceivers, CB and two-way radio systems, repeaters, etc.
Calibration: add $546.00
Calibration with Full Test Data: add $689.00
|
|
|
|
| ANRITSU S331A - $3,495.00
|
 |
|
SiteMaster Portability and Reliabilty -- Sold With Standard Accessories and 90 Day Warranty! |
Anritsu S331A SiteMaster, 25 to 3300 MHz, Cable/Antenna Analyzer. Site Master is the instrument of choice for transmission line/antenna installation and maintenance. It is the best way to reduce maintenance expenses and improve quality. It replaces stacks of heavy, expensive, and complex test equipment. Site Master's frequency domain reflectometry technique allows it to find problems before they become catastrophic faults, thereby creating a huge cost savings.
Calibration: add $312.00
Calibration with Full Test Data: add $377.00
|
|
|
|
 |
HP - AGILENT 8592D - $7,495.00
|
|
22 GHz Portable Spectrum Analysis Under $7500.00! |
The HP / Agilent 8592D Spectrum Analyzer is designed for use from 9 kHz to 22 GHz.
The 8592D offers basic RF and microwave measurement performance in an economic package.
Calibration: add $624.00
Calibration with Full Test Data: add $806.00
|
|
|
|
 |
We accept Credit Card, Check, Money Order, Wire Transfer, or PayPal for domestic orders only. |
|
 |
Credit applications must be completed, signed and returned via fax before your order will be processed. |
|
 |
All items are subject to prior sale. |
|
 |
Prices are subject to change without notice. |
|
 |
TekNet Electronics assumes no responsibility for errors or omissions. |
|
| You are receiving this newsletter because you have purchased equipment or services from TekNet Electronics, or have signed up for our newsletter. If you do not wish to receive messages and special offers from TekNet Electronics, please click here to be removed from our distribution list or email your request to remove@teknetelectronics.com. |