Stanford Research SR830 - $4,150.00 Dual Display DSPl Lock-In Amplifier New - Old Stock Unit, Spotless, Never Fielded The Stanford Research SR810 Lock-In Amplifier and SR830 Lock-In Amplifier provide high performance at a reasonable cost. The SR830 simultaneously displays the magnitude and phase of a signal, while the SR810 displays magnitude only. Both instruments use digital signal processing (DSP) to replace the demodulators, output filters, and amplifiers found in conventional lock-ins. The SR810 and SR830 provide uncompromised performance with an operating range of 1 mHz to 102 kHz and 100 dB of drift-free dynamic reserve. IEEE-488 and RS232 interfaces are standard. Calibration: add $286.00 Calibration with Full Test Data: add $390.00 ISO 17025 Accredited Calibration: add $585.00

Associated Research 3570D - $1,490.00 Late Model 5 kV AC / 6 kV DC Hipot Tester 5 User Programmable Memories For Test Set-Ups The Associated Research 3570D is a 5 kV/12 mA AC and a 6 kV/5 mA DC Hipot/IR Tester with a built-in continuity test for checking basic continuity. The 3570D test frequency is selectable from 50 to 60 Hz. Calibration: add $98.00 Calibration with Full Test Data: add $111.00 ISO 17025 Accredited Calibration: add $167.00

HP - Agilent 8564E - $17,800.00 40 GHz Spectrum Analayzer Under $18,0000 The HP / Agilent 8564E 9 kHz to 40 GHz Portable Millimeter Wave Spectrum Analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. Signals from 9 kHz to 40 GHz (preselected above 2.75 GHz) may be measured with a single coaxial connection (30 Hz to 40 GHz with option 006). The 8564E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. The 8564E offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage. Calibration: add $1,298.52 Calibration with Full Test Data: add $1,409.02 ISO 17025 Accredited Calibration: add $1,541.62

Krohn Hite 7500 - $2,380.00 DC - 100 kHz Solid State Direct or Capacitive Coupled 75 Watts CW at 125 Volts RMS (150 Watts at DC) The Krohn Hite 7500 is an all-solid state, direct-coupled amplifier, which provides 75 watts of continuous power (150 Watts at DC) at 125 volts RMS, from DC to 100 kHz. Flat frequency response and low distortion characteristics make the 7500 a great multi-purpose laboratory amlpifier. The 7500 output is protected from short-circuit or other abnormal load conditions. Calibration: add $175.00 Calibration with Full Test Data: add $200.00

Biddle 230315 - $888.00 Portable Lightweight 3 kV AC Hipot Tester 12 mA AC Leakage Current Testing Capability The Biddle 230315 is a 0 to 3 kV, AC Hipot Tester with adjustable leakage current trip levels from 0.3 mA to 12 mA AC. The 230315 portable design and lightweight (12.5 lb) characteristics make it an ideal tool for use anywhere in the factory where Hipot testing is a requirement. Calibration: add $98.00 Calibration with Full Test Data: add $111.00

Motorola R2600C - $6,760.00 1 GHz Comm Service Monitor Built-In Spectrum Analyzer / Tracking Generator The Motorola R2600C Communication System Analyzer is designed specifically for the service and monitoring of radio communications equipment. The R2600C represents a breakthrough in simplicity of operation. In place of numerous meters, keys and controls, the R2600C employs a large CRT display which simultaneously presents control and data displays. A simplified front panel, utilizing soft keys, cursor movement keys, a numeric keypad, an analog tuning control and other dedicated function keys all combine to make the R2600C extremely easy to learn and very efficient to use. Calibration: add $559.00 Calibration with Full Test Data: add $676.00