TTC - Acterna 41400 - $1,460.00 RS-449 / 530 / MIL Data Interface Special Clearance Reduction - Act Fast ! The TTC - Acterna 41400 RS-449 / 530 / MIL Data Interface gives the Fireberd 6000 DCE and DTE emulation capabilities. The 41400 has 25-pin D-type and 37-pin D-type or twinax connectors. In addition the 41400 is capable of operating in either a balanced or unbalanced mode.

HP - Agilent 8564E - $19,600.00 40 GHz Portable Millimeter Wave Spectrum Analyzer The HP / Agilent 8564E 9 kHz to 40 GHz Portable Millimeter Wave Spectrum Analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. Signals from 9 kHz to 40 GHz (preselected above 2.75 GHz) may be measured with a single coaxial connection (30 Hz to 40 GHz with option 006). The 8564E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. The 8564E offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage. Calibration: add $1,298.52 Calibration with Full Test Data: add $1,409.02 ISO 17025 Accredited Calibration: add $1,541.62

Mikron M310 - $999.00 Infra-Red Blackbody - 3 Inch Target - 100 to 300 C Calibration Error Below 100 C, Good 100 to 300 C The Mikron M310 is a highly compact portable blackbody calibration source with built-in digital indicating controller that can be set at any temperature between ambient + 10 Degree C and 350 Degree C. Once set, the source temperature is controlled to within 0.2 Degree C by an internal RTD sensor. The unit has an emissivity of +0.99. The M310 is easy to transport to a calibration location, either in laboratory or in the plant. It has a dedicated PID controller with 0.1 Degree C resolution. Calibration: add $1,023.46 Calibration with Full Test Data: add $1,023.46

Motorola R2670A - $9,800.00 Includes P25 Conventional or P25 Trunking Price Includes Standard Calibration Certificate / Label The Motorola R-2670A is a FMDA Digital Communications System Analyzer. In addition to including all of the features of the Motorola R-2600, the R-2670A is a special digital hardware platform that allows customized configuration to include many different test features in one convenient and easy-to use unit. The R-2670A also includes, as standard equipment, the following features: Tracking Generator Cable Fault Testing High Stability High Performance Spectrum Analyzer with Markers Programmable Test Set-up Memory Optional Test Capabilities: Motorola Analog Trunking APCO Project 25 Standard, conventional with IMBE Vocoder (for ASTRO CAI, or other radios) ASTRO VSELP Conventional and Encrypted Motorola ASTRO VSELP Trunking SECURENET (TM) Secure Voice Calibration: add $546.00 Calibration with Full Test Data: add $689.00

Keithley 580 - $1,850.00 Benchtop Milliohmmeter Lead Sets Priced Separately If Desried The Keithley 580 is a 4.5 digit autoranging Micro-Ohmmeter featuring seven ranges from 200 milliohms to 200 kilohms. Maximum resolution is 10 micro-ohm. The 580 features digital calibration through the front panel or via the optional gpib bus. Calibration constants are stored in non-volatile RAM. The 580 has dry circuit test modes that limit the applied voltage to 20 mV on the three lowest ranges. Relative reading displays permit subtraction of base readings. A choice of pulsed current or positive or negative dc current is selectable. Calibration: add $143.00 Calibration with Full Test Data: add $182.00 ISO 17025 Accredited Calibration: add $273.00

HP - Agilent 4195A - $3,250.00 10 Hz to 500 MHz Spectrum / Network Analyzer The Agilent / HP 4195A Network / Spectrum Analyzer provides excellent vector network and spectrum measurement performance from 10 Hz to 500 MHz. In addition to measuring a complete set of network and spectrum parameters, the 4195A can automatically derive impedance parameters from S-parameters. Direct impedance measurements from 100 kHz to 500 MHz can be performed using the optional 41951A impedance test kit. The 4195A directly measures amplitude ratio, phase, group delay, and spectrum level needed for characterizing linear / non-linear analog circuits or components. Calibration: add $468.00 Calibration with Full Test Data: add $585.00 ISO 17025 Accredited Calibration: add $878.00